Want to buy Bolts for Mills cabinet

Forum rules
This is the spot to list any parts that you are looking for.

Want to buy Bolts for Mills cabinet

Postby ThirdGenAmusement » Fri May 17, 2019 6:47 pm

Hello,

I have a Mills FOK which is missing the bolts that go through the cabinet into the bonnet. The cabinet bolt and nut is a 10-24X1-1/4 pan head bolt. I am including a picture of it for reference.


I'd also like to find 2 fillister bolts nickel plated 10-24X.5" or longer. I am looking for original hardware to match the patina of the slot.

Thank you.

--John
Attachments
Mills fok cabinet bolt.jpg
ThirdGenAmusement
 
Posts: 53
Joined: Mon May 13, 2019 4:21 pm

Re: Want to buy Bolts for Mills cabinet

Postby mechanic » Fri May 17, 2019 7:09 pm

I hate to be the bearer of bad news but the bolt in your pic is not a Mills. That style is for either a Pace or Watling machine. Mills had a square collar below the head and no knurling on the shaft.
mechanic
 
Posts: 741
Joined: Wed Mar 26, 2014 5:44 pm
Location: Toledo Ohio

Re: Want to buy Bolts for Mills cabinet

Postby ThirdGenAmusement » Fri May 17, 2019 7:21 pm

mechanic wrote:I hate to be the bearer of bad news but the bolt in your pic is not a Mills. That style is for either a Pace or Watling machine. Mills had a square collar below the head and no knurling on the shaft.


Thanks for the reply! I was suspect it may not be the correct bolt. I appreciate the confirmation. Still would like to find original Mills bolts(2) if possible.
ThirdGenAmusement
 
Posts: 53
Joined: Mon May 13, 2019 4:21 pm

Re: Want to buy Bolts for Mills cabinet

Postby MONTI » Sat May 18, 2019 8:28 am

Check with Dave Berten at mrslot1@aol.com and if he does not have them he may be able to point you in the right direction!
Bona Fortuna!
MONTI
MONTI'S SLOT SHOP
BUY * SELL * TRADE * RESTORE
Over 50 years experience in slot restoration

Serving Northern California, Nevada & Beyond
User avatar
MONTI
 
Posts: 583
Joined: Sun Nov 07, 2010 6:35 pm
Location: NORTHERN CALIFORNIA

Re: Want to buy Bolts for Mills cabinet

Postby ThirdGenAmusement » Sat May 18, 2019 9:32 am

MONTI wrote:Check with Dave Berten at mrslot1@aol.com and if he does not have them he may be able to point you in the right direction!
Bona Fortuna!
MONTI


Thanks Monti. I will shoot Dave an email. :D
ThirdGenAmusement
 
Posts: 53
Joined: Mon May 13, 2019 4:21 pm


Return to Parts WANTED

Who is online

Users browsing this forum: No registered users and 11 guests