Just picked up a Jenning Tic Tac Toe and the one reel strip is half gone. The guy I got the machine from gave me the replacement strips for the machine. I just want to make sure that I install them correctly. This is my first attempt at this. Looking at the front of the reel mech going from left to right the reel that's missing a piece has an A on top, so I just want to make sure that the middle is B or C before I go pulling them off. In the pic the orange middle is off but it did payout correctly so I'm using that as my mark. Thanks
One of the easy ways to set reel strips is to line up the bar in the correct place. There's usually only one or two on a strip. If you have the correct strips you have about 50/50 chance of getting it right on the first try. Line up the bar, then test a bell, etc.
Because it's a tic tac toe the first reel has two ticks the second has a Tac and the last one has three toes so I'm trying to work on the Bells but the whole entire all the reels strips are all off going to take a while