Page 1 of 1
Mills Extraordinary front lock
Posted:
Thu Oct 29, 2015 8:21 pmby drishoff
I have a Mills extraordinary with a front lock missing. Anyone have one with a key? Or a picture of what it looks like out of the machine?
Thanks again in advance David
Re: Mills Extraordinary front lock
Posted:
Thu Oct 29, 2015 9:32 pmby oldslotman
drishoff wrote:I have a Mills extraordinary with a front lock missing. Anyone have one with a key? Or a picture of what it looks like out of the machine?
Thanks again in advance David
D & D. vIntage Slots might have one.
Re: Mills Extraordinary front lock
Posted:
Thu Oct 29, 2015 9:56 pmby oldslotman
2ac2ab_f57dec8059ee4ad3814ae652995205df_jpg_srb_p_729_524_75_22_0_50_1_20_0.jpg
2ac2ab_aae619fbb99646099f9b5d779652d404_jpg_srb_p_764_568_75_22_0_50_1_20_0.jpg
I believe this is what you need. D & D vintage slots has them. Call Dave
Re: Mills Extraordinary front lock
Posted:
Fri Oct 30, 2015 5:21 pmby drishoff
Thanks. I will call
What was the purpose of it?
Re: Mills Extraordinary front lock
Posted:
Fri Oct 30, 2015 5:56 pmby oldslotman
For a hand load jackpot. Not sure if that is what you have. Looks like you may have a jackpot with reserve. Hand load jackpot have no reserve, I believe.
Re: Mills Extraordinary front lock
Posted:
Fri Oct 30, 2015 7:00 pmby mrslot1
I should have these, with key and inside bracket as well, I will look out in the shop over the weekend , feel free to email me at
mrslot1@aol.comthanks Dave
Re: Mills Extraordinary front lock
Posted:
Thu Nov 12, 2015 9:39 pmby drishoff
The bracket posted here from d & d is from a castle front and different than the extraordinary. When I put a coin in the jackpot feed it drops down in back of the jackpot compartment making me think there must have been another part that redirected the coin towards the front and down into the jackpot compartment?? My extraordinary does have the inside bracket but not redirection part. I did talk with Dave at d & d and sent him some locks to get keyed and am going to buy a couple more on the return shipment. Here is a pic of the inside bracket on the extraordinary. If anyone has any input on what else went with it please let me know.
Re: Mills Extraordinary front lock
Posted:
Thu Nov 12, 2015 9:48 pmby drishoff
Next couple posts and pics are general knowledge for the board users. Took pics of a couple other machine brackets. Here is a pic of the inside bracket on a golden falls.
Re: Mills Extraordinary front lock
Posted:
Thu Nov 12, 2015 9:52 pmby drishoff
Here is the pics of a mills Hi-Top B-O-N-U-S. It has the bracket with a shute the attaches to the bracket
Any info on the extraordinary shute or shield appreciated. Thanks for all the previous input.