CoinOpCollectorForum.com

looking for a reel shaft and the part it attaches to near the handle end.looks like the previous owner may have stripped the set screw and welded the two parts together.
thanks in advance
Don

don please measure it . need to know how long the one you need is.
most likely I have one
mike
you can contact me thru sjtradegum@aol.com

vndgguy wrote:looking for a reel shaft and the part it attaches to near the handle end.looks like the previous owner may have stripped the set screw and welded the two parts together.
thanks in advance
Don

Don:
There is nothing wrong with your reel shaft. All of the Penny Pack shafts have a weld spot at the Collette.
If the square-head set screw is missing, it's no big deal. Just thread another one in the hole if you choose.
Most Daval machines have that weld spot.
Bill

Mike
Sorry for the delayed response, got called out of town for a bit. Thanks for your response and effort locating the part, I was attempting to bring the machine back to original, but if the weld spot is correct I will leave it as is.
Thanks to Bill for the info.
Don