Cub, Imp vacuum pump wanted

Forum rules
This is the spot to list any parts that you are looking for.

Cub, Imp vacuum pump wanted

Postby Batlestar60 » Sun Dec 15, 2019 10:19 am

Anyone know where to get a vacuum pump like in this photo?
Attachments
870C4BA1-B67B-4345-BA5B-0DFE61396551.jpeg
Batlestar60
 
Posts: 7
Joined: Wed Dec 04, 2019 7:21 pm

Re: Cub, Imp vacuum pump wanted

Postby integ194 » Fri Dec 20, 2019 1:44 pm

Is yours missing or is it non functional?
integ194
 
Posts: 123
Joined: Mon Jan 19, 2015 6:47 pm

Re: Cub, Imp vacuum pump wanted

Postby Batlestar60 » Mon Apr 13, 2020 3:56 pm

I was trying to adjust the one in my Cub and it just crumbled into pieces,
Batlestar60
 
Posts: 7
Joined: Wed Dec 04, 2019 7:21 pm

Re: Cub, Imp vacuum pump wanted

Postby sct2011 » Thu Apr 16, 2020 7:14 am

Same thing happened to me. If the pieces aren't too small and you saved them you may be able to make a repair until you get a replacement. Both screw lugs and adjustment screw on the end broke off on mine. Repaired with hobby brass tubing and JB-Weld epoxy. On the end I slid the tubing over the broken pieces with epoxy and drilled the air hole in the appropriate place. Glued with lightly greased adjustment screw in place until epoxy started to setup. On the lugs I used split tubing (horseshoe shaped) cut to proper height and epoxy in place. Light adjustments needed with Dremel grinder needed for snug fit. Worked for me.
Hope this helps.
sct2011
 
Posts: 5
Joined: Tue Feb 10, 2015 11:47 am


Return to Parts WANTED

Who is online

Users browsing this forum: No registered users and 19 guests