CoinOpCollectorForum.com

Looking for a Bally Reserve Bell console slot machine schematic and operating manual. I'm also looking for a Bally Draw Bell console slot machine schematic for serial numbers below #1935. I have a Bally Draw Bell schematic for serial numbers above #1935, but there's a separate schematic for serial numbers below #1935, which is what my slot machine is.

Interesting, I just spent the last week off and on sorting out my Bally schematics but they are all in large hard copies but I'm not sure which exact model number your looking for!
The best place for Bally schematics, reel wiper assemblies, counter discs, wiring diagrams, Etc. is at this link below;

http://bingo.cdyn.com/slots/bally_manuals/

If it's not there I don't know what to tell you!
A good friend of mine just donated everything he had to a fella from NLG and he may be able to help!
Wolftalk on NLG, New Life Games!
Bona Fortuna!
MONTI

P.S.
I may have mislead you as you may be speaking of the early BALLY DRAW BELL CONSOLES like this photo of one I used to have years ago here below!
The site I gave you a link to would probably not help you but possibly this one would!

http://rwatts.cdyn.com/Machines/download_area.html

CIAO!
MONTI

Heck,
I've got schematics on my computer I forgot I had!
Guess I'm getting senile! LOL
Don't know if this will help, but it is for a Bally Draw Bell!
Bona Fortuna!
MONTI

Monti, thanks for sending the Bally Draw Bell schematic. That is the same schematic that I have, which is for serial # 1935 and up - I was looking for a schematic for machines which have serial numbers below #1935, as that is what my Draw Bell is, within my personal collection.
But although I didn't see a Bally Reserve Bell (circa 1948) schematic, I appreciate those links, as there may be some useful manuals and schematics within them. I got the customer's Bally Reserve Bell working and paying out without the schematic, but there are some features in it that I wanted to better understand/possibly repair (such as the reserve jackpot) where I could use the schematic. But I appreciate your help and quick response!
Sal