Mills click speed adjustment
Posted: Sun Jul 19, 2020 6:43 amI have a Mills Golden Falls and the 5th (last) click is almost right on top of the 4th click. Is there an adjustment where I can have a little space between the last two clicks?
CoinOpCollectorForum.com
Forum for those interested in antique coin operated devices
https://www.coinopcollectorforum.com/
Mills click speed adjustment
https://www.coinopcollectorforum.com/viewtopic.php?f=32&t=8464
Page 1 of 1
Posted: Sun Jul 19, 2020 6:43 amRe: Mills click speed adjustment
Posted: Sun Jul 19, 2020 1:32 pmTry adjusting the clock by bending the fan blade into more of a straight 'I' shape so that it catches more air and slows down the speed. It may be in too much of an 'S' shape right now, making the mechanism run fast. Otherwise, your tension spring on the back of the frame, attached to the Operating Fork, may be too tight.
Re: Mills click speed adjustment
Posted: Mon Jul 20, 2020 5:17 amI'll give it a try.. thank you!
Re: Mills click speed adjustment
Posted: Wed Jul 22, 2020 8:24 pmFan blade is flat with no curve. I switched springs from a couple other machines... no change!
Re: Mills click speed adjustment
Posted: Thu Jul 23, 2020 3:51 amFrom your post I assume there is still enough time between the 4th and 5th click to allow for the machine to pay. Having said that I would speed up the 4th click by bending the clock roller plate upward a bit. Its position controls the timing of the release of fingers and slides