Missing screw on Mills?

This is the area to talk about everything regarding repairing and restoring machines.

Re: Missing screw on Mills?

Postby Bally Bill » Sun Mar 27, 2022 12:20 pm

your welcome, Spring attaches to same anchor as the coin advancing locking lever bar which I see in you have in that first picture, make sure the part comes with spring and the shoulder bolt.
Attachments
Mills ES 8 bolt.jpg
Mills ES 9 spring.jpg
Bally Bill
 
Posts: 62
Joined: Fri Feb 11, 2022 8:32 pm

Re: Missing screw on Mills?

Postby wildman » Sun Mar 27, 2022 1:52 pm

Thank you.
I am going to guess that the anchor you mention, already has a spring attached?
wildman
 
Posts: 23
Joined: Fri Mar 11, 2022 11:11 am

Re: Missing screw on Mills?

Postby Bally Bill » Sun Mar 27, 2022 2:06 pm

hopefully you find the part with the spring included but you could possibly find both on the forum or on the BAY website.
Bally Bill
 
Posts: 62
Joined: Fri Feb 11, 2022 8:32 pm

Re: Missing screw on Mills?

Postby wildman » Sun Mar 27, 2022 2:19 pm

I probably did not word my last response correctly.
The part I have ordered has a spring.
I was guessing it should attach to the same place as an existing spring
Attachments
67000837653__188BA0B9-7FBC-4805-8228-62E342450218.jpeg
wildman
 
Posts: 23
Joined: Fri Mar 11, 2022 11:11 am

Re: Missing screw on Mills?

Postby Bally Bill » Sun Mar 27, 2022 2:28 pm

yes on the anchor attached to the escalator
Bally Bill
 
Posts: 62
Joined: Fri Feb 11, 2022 8:32 pm

Previous

Return to Repair / Restoration Questions

Who is online

Users browsing this forum: No registered users and 22 guests