Is this a problem?

This is the area to talk about everything regarding repairing and restoring machines.

Is this a problem?

Postby TrinityB » Sat Jan 07, 2023 5:26 pm

Please see pic attached... do I need to replace?
Attachments
16731375340073689746243178902386.jpg
User avatar
TrinityB
 
Posts: 16
Joined: Tue Dec 27, 2022 4:13 pm

Re: Is this a problem?

Postby mazzeosa17 » Sat Jan 07, 2023 5:44 pm

If you mean you should replace that part because the kicker lever has three notches in it, no, not as long as the 3 reels are getting kicked off and spinning ok. At some point, the grooves may get too deep and you could have them build back up with a welding rod repair. But that's if the 3 reels are not getting kicked off properly and are not spinning ok.
mazzeosa17
 
Posts: 91
Joined: Fri Oct 18, 2019 4:14 pm

Re: Is this a problem?

Postby TrinityB » Sun Jan 08, 2023 4:07 am

Thank you
User avatar
TrinityB
 
Posts: 16
Joined: Tue Dec 27, 2022 4:13 pm


Return to Repair / Restoration Questions

Who is online

Users browsing this forum: No registered users and 24 guests