Page 1 of 1

High Top

PostPosted: Wed Aug 28, 2019 5:34 pm
by capt7310
Reaching out for insight. I friend just gave me this High Top that was in a work shop for years and of course was a mess. I have no clue what this reel bundle is. I think from the markings on the strips it maybe from a Jennings?. It's rough but I'm going to clean it up and get it working. Just would like to know about the reel bundle. Thanks

Re: High Top

PostPosted: Thu Aug 29, 2019 4:49 pm
by mechanic
What you have is a Jewel Bell Hi-Top. Everything looks good except for the reel bundle. Either the reel bundle was changed or just the strips. The strips are from Autobell mfg co. from back in the 50's and was owned by Zeke Wolfe. The machine was called a Wild Indian which is why the Indian symbols on the strips. Many Autobell machines are miss represented as standard Mills. Should Monti see this posting he should be able to give more info on the Autobells.

Re: High Top

PostPosted: Thu Aug 29, 2019 5:01 pm
by capt7310
As always thanks Jim

Re: High Top

PostPosted: Fri Aug 30, 2019 6:14 pm
by MONTI
It is my understanding that Auto Bell revamped slot machines from 1951 to 1962, most of them Mills High Tops like the one shown, one of which I believe was called the Arrow Head and another model called the Thunder Chief which had the reel bundle you show!
Dick Bueschels book #14 of THE COIN SLOT series covered the Auto Bells!
Hope this helps!
MONTI

CoinSlotGuide-14.jpg

Re: High Top

PostPosted: Sat Aug 31, 2019 5:21 am
by capt7310
Hi Monti, Thanks for the reply, you and Jim both helpful as always. When I first got the machine for FREE I said another cart away someones crap, but afterwards I thought it will be a great restore project. It needs rear door, cash box, there is no jackpot, but thats OK I'll make it right. Thanks again!

Re: High Top

PostPosted: Tue Sep 24, 2019 4:32 pm
by capt7310
Hey , just wanted to share I finished the machine and I think for a short timer it came out pretty well.

Re: High Top

PostPosted: Tue Sep 24, 2019 5:03 pm
by MONTI
capt7310 wrote:Hey , just wanted to share I finished the machine and I think for a short timer it came out pretty well.


Nice Job! =D> =D>
And you left a little patina to show age!
MONTI

Re: High Top

PostPosted: Tue Sep 24, 2019 5:11 pm
by capt7310
Thank you Sir Monti!

Re: High Top

PostPosted: Tue Sep 24, 2019 8:30 pm
by mechanic
Nice original color scheme !!! Good job !!