1939 mills 50¢ machine for sale

Have a generic question? Post it here.

If you have a question regarding a specific slot machine or trade stimulator please post it in either the Slot or Trade Stimulator area.

Re: 1939 mills 50¢ machine for sale

Postby Jackpot » Thu Feb 21, 2013 9:07 am

Here Guys, Please allow me to clear this up a bit. Here is what I found, I see the first 50 cent machines showing up in 1936. This is according to my serial number list. Please see attached............
Jackpot =D>
Attachments
1st mills 50 cent machines.jpg
Known Serial Numbers
I Buy-sell-trade coin op's. I also have some later model slot parts. There are piles of manuals at:
http://coinslots.com/page21.html
Jackpot
 
Posts: 94
Joined: Wed Nov 24, 2004 9:15 am
Location: Shoreline Washington

Re: 1939 mills 50¢ machine for sale

Postby andydotp » Thu Feb 21, 2013 11:40 pm

Thanks chaps,
I plumped for 1946 for the Fishmouth coin entry specifically, not suggesting there weren't any pre-'46 half dollar machines per se. I based this on Dick Bueschel's words on the '46 Black Cherry in his terrific book "Collector's Guide to Vintage Coin Machines"
Big Money back in the thirties either way!!

Afraid my eyesight - even with Ctrl+ can't make out the list you posted Jackpot so can't comment on what you're displaying. Not that I'm doubting you for a second.

While you have your list there, could you kindly date my Mills Cast Iron Operators Bell - serial 19455. I reckon 1911 as it has the smooth feet not scrolled. Appreciate your advice.
Regs all,
andydotp
andydotp
 
Posts: 119
Joined: Fri Jan 11, 2013 6:39 pm

Re: 1939 mills 50¢ machine for sale

Postby Jackpot » Fri Feb 22, 2013 2:04 am

If you just click on that list or photo, it should fill your screen. Mills Serial 19455 fits in the middle of known 1915 machines. Hope this is some help.
Thanks
Jackpot
I Buy-sell-trade coin op's. I also have some later model slot parts. There are piles of manuals at:
http://coinslots.com/page21.html
Jackpot
 
Posts: 94
Joined: Wed Nov 24, 2004 9:15 am
Location: Shoreline Washington

Re: 1939 mills 50¢ machine for sale

Postby andydotp » Fri Feb 22, 2013 3:24 am

Thanks once again Jackjpot,
D'oh, forgot to click on before enlarging..
Four from '36 then,, hmm :!:

1915 on my OPs Bell that's really interesting to know and much appreciated.
(If I could upload pics of the poor devil I would).
Regards,
andydotp
Last edited by andydotp on Sat Feb 23, 2013 3:38 pm, edited 1 time in total.
andydotp
 
Posts: 119
Joined: Fri Jan 11, 2013 6:39 pm

Re: 1939 mills 50¢ machine for sale

Postby terick2104 » Fri Feb 22, 2013 3:54 am

I counted 14 50c Mills slot machines in Dick Bueschels 'SLOTS 4' serial number update in the 1930's. I have had 50c Castlefronts in my shop. 50c machines were made in the 1930's, I don't imagine there is a lot of them, 50c was big money back then. Also Jenninigs made 50c machines in the 1930's and in the 1920's. I had a 50c Jennings with a Roberts front in my shop for restoration a few years back. It was a converted from a 1920's Operators Bell. It had 50c cast right in the gooseneck.
terick2104
 
Posts: 185
Joined: Tue Jan 01, 2013 4:32 am

Previous

Return to Just Chatting

Who is online

Users browsing this forum: No registered users and 3 guests