CoinOpCollectorForum.com

Does anyone know if mills produce a hightop machine with the painted reel glass like the sega bells. I have a hightop with a mills mech and the castings do have mills part numbers cast into top and bottom but the reel window is not divided like the early high tops it is a painted glass trying to determine if. mills 777 or sega "frankenmachine"

OK Dave, here is another new member, not added to the roster, along with several others, since Feb.3
Not sure what is going on, but it is locked at the end of page 30, and has not continued to page 31. Bill

Hi,
Mills Bell-O-Matic made their high tops in the late 1950's with a top casting that had no dividers, they also used a screened glass and a curved plastic award card, it is possible that these were built for the U.K market only, Sega also did the same, but without the curved plastic award card.

Freddy Bailey

Nw Greg wrote:Does anyone know if mills produce a hightop machine with the painted reel glass like the sega bells. I have a hightop with a mills mech and the castings do have mills part numbers cast into top and bottom but the reel window is not divided like the early high tops it is a painted glass trying to determine if. mills 777 or sega "frankenmachine"

Thanks freddy for your reply it is most helpful

SLOT DYNASTY wrote:OK Dave, here is another new member, not added to the roster, along with several others, since Feb.3
Not sure what is going on, but it is locked at the end of page 30, and has not continued to page 31. Bill

I think I fixed the problem.

Let me know.