Page 1 of 2
Mills Skyscraper award card.
Posted:
Wed Sep 06, 2017 8:32 pmby oldslotman
Any chance someone with a Mills skyscraper can send me a scan of a 2/4 award card. Can't seem to find one.
Re: Mills Skyscraper award card.
Posted:
Wed Sep 06, 2017 8:46 pmby marsonion
oldslotman wrote:Any chance someone with a Mills skyscraper can send me a scan of a 2/4 award card. Can't seem to find one.
I think
midcoastvintage has those listed under the "parts for sale" topic.
Re: Mills Skyscraper award card.
Posted:
Wed Sep 06, 2017 9:31 pmby oldslotman
marsonion wrote:oldslotman wrote:Any chance someone with a Mills skyscraper can send me a scan of a 2/4 award card. Can't seem to find one.
I think
midcoastvintage has those listed under the "parts for sale" topic.
I sent him a PM but got no response.
Re: Mills Skyscraper award card.
Posted:
Thu Sep 07, 2017 1:44 amby kentdun
I have a Skyscraper. Pretty sure it's a 2-4..
I'll check after work and scan it.
Kent
Re: Mills Skyscraper award card.
Posted:
Thu Sep 07, 2017 2:27 amby SLOT DYNASTY
I have a complete photo-file listing, of all of the cards that 'midcoastvintage' has, and the "Skyscraper" card is not in the file.
Re: Mills Skyscraper award card.
Posted:
Thu Sep 07, 2017 7:06 amby marsonion
SLOT DYNASTY wrote:I have a complete photo-file listing, of all of the cards that 'midcoastvintage' has, and the "Skyscraper" card is not in the file.
Sorry, I guess I was thinking of this one:
viewtopic.php?f=29&t=3554...but with a second look, it appears the size (length) may not fit the Skyscraper award frame, which is pretty small.
Re: Mills Skyscraper award card.
Posted:
Thu Sep 07, 2017 5:03 pmby oldslotman
I believe that they are the same size as the Mills extraoridinary card.
Re: Mills Skyscraper award card.
Posted:
Thu Sep 07, 2017 5:58 pmby tsparts4u
If you have not found an award card for your Mills Skyscraper, I have two cards that will fit.
The card comes with a piece of plastic for protection. Cost is $6.00 each and includes shipping.
Regards,
Jerry
Re: Mills Skyscraper award card.
Posted:
Thu Sep 07, 2017 6:02 pmby SLOT DYNASTY
I no longer have a "Skyscraper" to check the size, but I do believe that the card is the same size as the Mills
Silent series, like the "War Eagle", "Castle Front", etc. Midcoastvintage has this card, and will know if it is
for your machine as well. He just doesn't have it listed separately on the file I have. There is also a model
of the "Skyscraper" that had photo-etched metal award plate. As for the Silent series award card fitting the
"Extraordinary", that card is about the same height, but is narrower, somewhat like the "Poinsettia" card,
and would have to be trimmed.
Re: Mills Skyscraper award card.
Posted:
Thu Sep 07, 2017 6:38 pmby oldslotman
Card size is 2 1/8 by 4 1/4 . I think I may have found one. Will let you know if it does not work out. Thanks. The Mills number on the bottom of the card is CC-331