CoinOpCollectorForum.com

I purchased Mills Castle 1¢ slot machine as a project. I am wondering since this is the smallest amount people could play that these machines were more common than higher amounts and there would be more of them out there. Questioning its value. Insights would be appreciated.

Penny Castle Fronts are pretty unusual.

Most machines of that era are $.05 and $.10.

HI I think the 25 cent is most desirable slot. The penny is rarer and not that common in the collector world. Might be worth more to some people than the 5 and 10 cent models.

Thanks.

Not as common and would love to have that one in its condition. Rick B

Personally I think the earlier Penny slots do have their following as collectible items!
Especially those dispensing Gumballs such as the Jennings Duchess as pictured below, which was the sister to the Little Duke!
It is really a matter of personal preference as in my 35 Plus years in the hobby and doing restoration work I have seen many of them!
Just my two cents! LOL
Pun Intended!
MONTI

QuarterSawn wrote:I purchased Mills Castle 1¢ slot machine as a project. I am wondering since this is the smallest amount people could play that these machines were more common than higher amounts and there would be more of them out there. Questioning its value. Insights would be appreciated.

I have one too, the 1 cent machines in their original condition have a good premium

I think for display, a penny machine is really desirable. Mainly, because you can fill it with inexpensive pennies. Even the old wheat pennies are plentiful and inexpensive, making the machine totally vintage.

Nickel machines need old buffalo nickels in my experience, to function properly without jamming, and even the no-date coins are somewhat expensive. And messy, too.

Quarter machines, same sort of issue. To make the machine look vintage, you need old quarters. The current minted quarters don't even look like quarters anymore.

Half-dollar and dollar machines, forget about filling them up...it'll cost you more in coins than the machine is worth.

My vote is for penny machines across the board, for display and curious onlooker use anyway.

RameGoom wrote:I think for display, a penny machine is really desirable. Mainly, because you can fill it with inexpensive pennies. Even the old wheat pennies are plentiful and inexpensive, making the machine totally vintage.

Nickel machines need old buffalo nickels in my experience, to function properly without jamming, and even the no-date coins are somewhat expensive. And messy, too.

Quarter machines, same sort of issue. To make the machine look vintage, you need old quarters. The current minted quarters don't even look like quarters anymore.

Half-dollar and dollar machines, forget about filling them up...it'll cost you more in coins than the machine is worth.

My vote is for penny machines across the board, for display and curious onlooker use anyway.

I agree Ramegoom!
To say nothing about causing short pays as the newer coins are slightly thicker as shown in these photos below!
MONTI

MONTI wrote:
I agree Ramegoom!
To say nothing about causing short pays as the newer coins are slightly thicker as shown in these photos below!
MONTI

Hello Monti,

I shot that image of the stacked nickels for another thread-- any chance you have a similar comparison for the old (junk silver) vs. newer (clad) quarters? I'd like to know exactly how those stack up to each other too; so far, it looks like 15 new quarters stack about as high as 16 old quarters...