Mills vendor monitoring sensing lever base

[briank]

Does anybody have the base plate (for lack of a better description) for a Mills gooseneck mint vendor. It sits at the front of the payslides and the mint sensing lever rests on it. I have a picture of it with a finger pointing to it courtesy of THE OWNERS PICTORIAL GUIDE figure c.13

[briank]

Here is a picture of my slot and what is missing.

[briank]

Or...if somebody can send me dimensions, I can make this piece. Thanks

[gsx11r]

Hi
Mrslot1 must to have !
But I will post photos and size tomorrow for be sure that you find the good part !( 2 different parts for the same place !)
Stephane

[gsx11r]

Hi Again
Here is what I have !
You need this !But there are an other model , but not good for your slot machine !

The other model :

The size :

If you need more info , just let me know !
Stephane

[briank]

Wow! Thank you very much, Ill get to making this, should not be very difficult. What models was the other piece used on?

[gsx11r]

The other gone on all other models :Silent like war eagle , roman head?... ( except the one with Front vendor, you need the other !) and hig top .
Stephane

[briank]

Stephane, I made the payout slide stop (is that the correct name or is it called a sensing lever stop?) Anyways, I went to put it in and Im missing something else that goes behind that. It appears to be a lever of some sort. I see it in your picture and if you look at mine again, you can see what os missing. Im not sure what else goes with that lever that runs vertically.

[briank]

Its part 595c per Bueschels coin slot #17, anti cheating lever.

[mechanic]

There are more than 4 different slide stops for Mills. The two pictured each have another variation.